Master Craftsman Uses Traditional Ways

Tim Williams takes a break in his shop where he is building a .58 caliber flintlock rifle.

Tim Williams takes a break in his shop where he is building a .58 caliber flintlock rifle. (Photo by Jeff McCoy)

The Eastern Panhandle was the edge of the frontier in the 1700s. Men from the area joined up with a young officer named George Washington and started the march into history in what became known as the French and Indian War. Open land that could be used to farm was a big draw for immigrants who came to seek their fortune, find religious liberty or just to start all over again.

Today, Tim Williams works in Back Creek Valley on land that is part of that rich history. Settlers were dependent on tools and a rifle. In those days, flintlock rifles that required a pan attached to the side to be loaded with black powder to ignite the powers packed behind the ball in the barrel were cherished.

Williams is known nationally as a master craftsman. He hand builds rifles, pistols and fowlers one at a time for a waiting list of buyers, using mostly hand tools to complete his work. He is in such demand that there is a two and a half year waiting list.

“I’ve sold guns to California, Arizona — I sell them everywhere. I build about 10 a year. I usually build a few bows, too,” Williams said.

His shop is well organized. A .58 caliber flintlock rifle sits on a workbench under construction. Williams builds the rifle to the shooter making sure it’s a good fit. The workmanship is flawless. The process is tedious and exact. Engraving is all done free hand and leaves no margin for error. Holding the rifle, it becomes more than just a hunting or shooting weapon — it’s a work of art.

It’s also very accurate. Williams has been known to shoot the flame off of candles and has even shot a poker card in half — that was set on its side.

Williams used to build houses. From the very beginning he established himself as a craftsman. People knew if he built their traditional home, it would be done right using the best materials available. Then the recession hit and Williams found himself seeking work.

“I kept saying, ‘God, why don’t you give me a job, I need a job, I need work,’ and then He said, ‘Why don’t you do what I sent you?’” Williams said.

He started making rifles as a hobby while still working as a home builder. Suddenly, it seemed to all make sense. That eye for detail and dedication to craft has carried over to his gun making. Williams found that, just like building homes, he was drawn to traditional, handcrafted ways.

Those handcrafted ways are producing an heirloom that will last for generations.

“I didn’t think about it when I first started building almost 20 years ago that it is something to be handed down. There’s no reason that 200 years from now somebody can’t be holding this gun and passing it on and telling a story of their own about it,” Williams said. “I’m sure they didn’t think in the 1700s that we’d be talking about their guns.”

Standing in his shop is like going back in time, a time that Williams believes built America.

“I think we have lost touch as America — I mean we have lost sight of what America is all about. If the families were more dependent on each other and what they can do and when you do it yourself, I think that draws the family closer,” Williams said. “You spend time together, not apart. It’s just a shame, too, because I think everybody has that potential and I think that everybody is yearning for that closeness of a family.”

He has provided living history education for adults and school children. He found they also were interested in history, especially when they could see it right in front of them.

“I would dress like a scout. I would have a bedroll on my back and have a haversack and different things. I would say, ‘How long do you think that I can stay out the way I am set up right now?’ They would say, ‘Maybe a day, maybe two days,’ or something like that. What if I told you I could stay out for a least a week?” Williams said. “I think what it does is bring to life history, which is what I do — living history. And then when they see somebody and see the things and can actually touch them, it’s just a whole different ball game. They get excited about it. It comes alive.”

Today, Williams spends six days a week in his shop. An assortment of hand tools are organized and at the ready. The tools are well cared for just like a settler 260 years ago. It’s a simple life reflecting back to simple times.

Williams hunts with his own rifles and everything else from that time period.

“We do winter camps and it’s zero degrees sometimes, and we stay just fine with nothing but period clothes,” Williams said.

His guns are in such demand that he can’t even keep the ones he builds for himself.

“The one I took moose hunting I didn’t have six months. I finished it in August, shot it on a moose hunt in October, shot four deer through rifle season here and then sold it in January,” Williams said.

Original article by Jeff McCoy (Journal News)


Tim Williams – Rifles that Put Meat on the Pole

An interview by Michael Beliveau for Muzzleloader Magazine.

“The only interesting rifles are accurate rifles.” Those are the words of Col. Townsend Whelen, who was perhaps the best outdoor writer of the twentieth century. But those same words could easily be attributed to longrifle builder Tim Williams. Tim is a dedicated flintlock hunter who expects the guns he builds to reliably put meat on the pole.

Tim Williams - Rifles that Put Meat on the Pole 1

Tim Williams

As I was talking to Tim, he was working on a York County rifle for himself. He was building a .58 caliber rifle based on an original, 1770s rifle made by York County gunsmith George Schreyer. Tim plans to use it for a moose hunt. As it turns out, moose is just one of the few major North American game animal that Tim hasn’t harvested.

I remarked that .58 was a pretty big bore for moose. I told Tim that my friend, and fellow gun builder, David Price took the New Hampshire state record moose with a .54 caliber gun. Tim acknowledged that a .54 will take most anything on four legs, but when he shot a buffalo, he used a .54 caliber gun, and he found himself wishing he’d brought a .58.  So, when he goes for moose, he’s going to pack a .58, just to be sure.

Tim told me, “I’ve taken everything from squirrels to buffalo with flintlock rifles that I’ve built myself. For the last fourteen years I’ve hunted with nothing else.”

Tim’s dedication to hunting with muzzleloaders is even more impressive when you consider that he resisted the siren call of black powder shooting for many years. Tim’s good friend, Brian LaMaster, tried to interest him in shooting muzzleloaders, but Tim resisted. Finally, after 10 years, Brian convinced Tim to shoot a flintlock rifle, and, as has happened to so many of us, with his first scent of aromatic gun smoke, Tim was hooked for life.

It wasn’t long before shooting muzzleloaders led to a desire to build muzzleloaders. Tim had long felt an affinity to eighteenth century craftsmanship.   Before    becoming a professional gun maker, Tim’s profession was home building. During a trip to colonial Williamsburg as a young man he developed a fascination with eighteenth century architecture. Tim started incorporating those colonial period designs into houses he built, and, as he did, he became more interested in the history of the era. Building flintlock guns became a natural direction for Tim to travel. It melded his interests in eighteenth century history and craftsmanship with his new-found love of hunting and shooting with muzzleloaders.

When Tim decided to build his first longrifle he had an advantage that most of us can only dream about. His friend and shooting buddy Brian LaMaster is also a nationally recognized gun builder. Brian was happy to advise Tim as he worked on his first rifle. Brian became Tim’s gun- building mentor, and he still provides Tim with valuable advice.

Tim’s first rifle was a .54 caliber, early Virginia style rifle with a sliding wood patchbox, and really nice, curly maple stock. I asked Tim how it turned out. “It was pretty good for a first try,” Tim replied. “I was pretty happy with how it turned out, and I took a few deer with that gun.”

The problem with building a gun that successfully harvests game, is that all your buddies want to buy it from you. Tim couldn’t seem to hold on to his personal guns for long. But, it did give him an excuse to build another, and another…Tim still can’t keep his personal rifles for much beyond one hunting season.

I asked Tim what he thinks of his first rifle these days.

“I haven’t seen that gun for awhile,” Tim replied, “But I’ve seen a couple of my other early guns, and you always see the things you’d do differently today. It’s not that they aren’t good guns, but every day you learn something new. My work today is a lot more refined in the details than the guns I made the first couple of years.”

Tim’s growth as a gun maker is something he credits to the influence of Brian LaMaster. One of the most important things Brian did for Tim was to expose him to original flintlock guns.  As  Tim   says,  “It’s  easier  to recreate the feel of an original gun,  if you can actually hold the original gun. They are so smooth, and the lines just seem to flow. Actually holding an original is a lot better than working from a picture. In a way, you can see better with your hands than you can with just your eyes.”

In Tim’s view, correct architecture is the most important factor in building a proper eighteenth century gun. “Of course, you Tim Williams - Rifles that Put Meat on the Pole 2have to make some adjustments so the rifle fits the shooter,” Tim says. You can’t shoot well with a gun that doesn’t fit you.” That’s why he likes to personally meet the person he’s building a gun for. He wants to make sure the gun will fit, and that it will be suitable for the purposes the owner intends to put it to.

In Tim’s opinion, that has always been important. “A gun has to fit, and it has to work…every time,” Tim said. “In 1770 when a man bought a gun and headed off to the frontier, if the gun failed, that man died.” It may not be life and death today, but Tim approaches fit and reliability as if lives are still in the balance.

When Tim is building a  gun,  he likes to  personally meet  with the client. He feels it’s important to understand what a person plans to do with the gun, whether it will hang on the wall as a prized possession, or be used competitively, or if it will be carried deep into the back country for extended hunts. “You really get to know a person when you build them a gun,” Tim explains. “And that’s part of what keeps it interesting.”

Tim is drawn to the earlier rifles of the 1760s through the 1780s. “There is something about those guns that just feels right,” he said. That’s why he likes to build guns that replicate a particular original as closely as possible. As Tim says, the best builders of the eighteenth century, like Isaac Berlin, John Shuler or George Schreyer, were at the top of their game. It is hard enough for him to equal their work, let alone improve on it. So Tim likes to approach his work the same way they did.

He always starts with a full plank. “You can go anywhere if you start with a plank…any style of gun, any length of pull, Tim said. “If you start with a profiled stock blank, you are already locked in   to   some   dimensions.”   In fact Tim makes most of the furnishings for the rifles he builds.

Tim says, “People will ask me why I spend so much time making small parts like nose caps, when I could save time and money by just buying them.

“Sure,” he says, “I could buy a mass-produced brass nose cap for about eight bucks, but when I’m building a rifle, I know exactly what the profile of that fore- stock needs to look like. What are the odds that a nose cap from a catalog will match the shape of the fore stock? But if I make my own nose cap, I can make it the right shape from the start. Small things like that have a big impact on getting a gun’s architecture right.”

Tim does most of his gun work with hand tools. He uses a  and  saw to rough cut stock blanks and  he uses a router to start out barrel channels, but most of his work is done with chisels and scrapers. Tim believes that he can’t do much to improve on the old ways.

Tim said, “Power tools don’t really speed up the work, but they do let you make mistakes a lot faster.”

Tim Williams - Rifles that Put Meat on the Pole 3Tim believes that when you study original rifles, and closely examine the way eighteenth century builders actually did their work, you’ll see that doing it the same way that they did will usually give you the best result. That close examination is the key. When I asked Tim what has changed about his work over the years he didn’t hesitate over his answer.

“I started building guns in 1999,” he said, “In the early years I saw the whole gun, and trying to re-create that is a tough job, there’s just too much to take in. Now I spend more time looking at…and I mean really examining…the details.”   As   Tim explains, that gun is made up of a myriad of details. If you concentrate on getting each detail right, in the end, you’ll have a finer gun.

Not many people can make a living building flintlock guns. I asked Tim how he made the transition from part time builder to actually doing it for a living. He told me that it happened very naturally. For most of his life Tim was a homebuilder. When the housing market slumped seven years ago, his home building work slowed down. But, as one door closed another opened. As home orders declined, his gun orders were on the rise, and, like a natural process, the gun work increased until it was his main business.

Tim believes that God gives us all gifts, and that his gun making abilities are his gift from the Lord. Tim is humble about his gifts, and he is very thankful for the good things in  his  life. “God gave me this talent, and then He opened doors for me so I could use it to support my family. I definitely see His hand in my life.”

Tim is a member of the Contemporary Longrifle Association (CLA), the Kentucky Rifle Association (KRA), the National Muzzle Loading Rifle Association (NMLRA), and the National Rifle Association (NRA).

Download the entire interview with photography by Ric Lambert.

Go to Top